Q Acoustics 3020i Bookshelf Speakers, Carbon Black
Compact Bookshelf Speaker
2-way Reflex Enclosure
Sensitivity: 88dB
Frequency Response 64Hz - 30kHz
|
|
|
|
|---|---|---|
P2P BracingThe Q 3020i boasts P2P (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before (* entire series ). With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet. Left image shows a cabinet without bracing, Right image shows a cabinet with P2P bracing. |
New Low Profile Binding PostsConventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used. |
Increased Cabinet Size DeliverThe Q 3010i maintain the same acoustically optimal front profile, but have been made slightly taller and 25% deeper than previous models. This increased internal volume has enabled Q Acoustics to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. As an added benefit the enlarged front-to-back dimension means that any cone- generated noise reflected from the back wall of the enclosure and out through the cone itself is reduced. |
High-Frequency Driver Unit
All 3000i Series tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference.
Mid/Bass Driver
Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self- damping which means it can accelerate without flexing and without unwanted resonances.
|
|
|
|
|
|---|---|---|---|
| Brand | Q Acoustics |
|---|---|
| Product Code | QA3526 |
| Q 3020i Specifications | |
|---|---|
| Loudspeaker | Q 3020i |
| Enclosure Type | 2-way reflex |
| Bass Unit | 125 mm (5 in) |
| Treble Unit | 22 mm (0.88 in) |
| Frequency Resp (+3 dB, -6 dB) |
64 Hz - 30 kHz |
| Average Impedance | 6 Ω |
| Minimum Impedance | 4 Ω |
| Sensitivity (2.83 [email protected] m) | 86 dB |
| Stereo Amplifier Power | 25 - 75 W |
| AV Receiver (2 ch. driven) | 50 - 125 W |
| Cross-over Frequency | 2.4 kHz |
| Effective Volume | 6.1 l (372 c. in) |
| Enclosure Dimensions (W x H x D) |
170 x 278 x 282 mm (inc. grille terminals and feet) (6.7 x 11.0 x 11.1 in) |
| Weight (per speaker) | 5.5 kg (12.1 lbs) |
Products showing as "In Stock" above can be ordered for delivery or Click & Collect.
If you would prefer to visit our Newcastle or Metrocentre stores, then please Contact Us to check availability, as with such a vast range we are unable to keep every item on display in our shops.
I you would like to ask any questions about this product then please contact us for assistance.
